Make a Phone case with AI — describe it, get a model
Measure the phone, then place the camera cutout and buttons yourself
Describe the Phone case you want and the model appears. Dimensions, holes and clips stay editable.
How it works
- 1
Say what you need
Sizes, holes, what it fits — the more specific you are, the closer the first version lands.
- 2
Fix it on the model
Click whatever is wrong and say a sentence, or drag it. Only the part you pointed at changes.
- 3
Export and print
Once wall thickness, overhangs and watertightness check out, export STL or 3MF and slice.
About this kind of model
- How much clearance does a phone case need?
- For flexible material (TPU) add 0.3–0.5 mm over the measured body; for rigid PLA/PETG go to 0.6–0.8 mm or it will not go on. Give the corners and the camera edge a little extra — those two catch first.
- Can I get exact dimensions?
- Yes. Every dimension takes a typed value — dragging is just the fast way in. That is what mating parts, snap-fits and hole alignment need.
- What if it does not fit when printed?
- Measure the real object first, then state those numbers — that alone gets most parts right on the first try. And leave tolerance: 0.2–0.4 mm is typical for snap-fits, depending on your printer.
- Can I reprint it at another size?
- Yes, and this is where it saves the most time: make the key dimension a parameter and a new size is one number away — the whole model recomputes itself.
- Will my slicer read the file?
- Yes. STL is universal; 3MF carries real units, so nothing arrives 1000× too small.